I've built a solid walnut coat rack that's about a foot and a half long, but it isn't long enough to reach across two studs in my drywall. My main idea is to secure it to one stud in the middle and then use drywall anchors at each end to prevent any twisting. Does anyone have better suggestions or tips? I want it to stay sturdy!
4 Answers
Two screws in the center stud and then use toggle bolts on the sides is the way to go. Those screws alone will add significant support, and the toggle bolts are much stronger than standard anchors. You’ll be set!
Your plan sounds solid! Mounting it to one stud in the center with drywall anchors on the ends is a tried-and-true method. I've done something similar with a large whiteboard, and it has held up perfectly for years without any issues.
Using one stud is definitely fine! I recommend going for toggle bolts instead of regular drywall anchors on the ends. They hold way better and are super easy to install. Plus, if you ever need to repaint, you just unscrew the coat rack, and the toggles stay put for future reinstallation!
Exactly! Toggle bolts provide way more support, and you'll have a much easier time overall. It's a great way to go!
If you want extra stability, you could screw a longer board to the studs and then attach your coat rack to that. Just make sure it's securely fastened! This will help distribute the weight evenly.
Absolutely! Those toggle bolts will give you peace of mind. With that setup, you shouldn't have any problems with a coat rack!