I'm looking for advice on how to address water issues near my frameless shower door. The drywall starts a few inches away from the door hinge, and while the drywall is holding up for now, I want to ensure it lasts. The trim at the bottom is getting wet, and I suspect this is related to a crack. I'm considering replacing the pine trim with PVC to prevent water damage. For the drywall, would it be better to use moisture-resistant drywall, Hardi board with a layer of RedGard, or tile? Also, there's a gap when the door opens that might let water through. I'll be replacing the missing seal at the bottom, but I'm looking for any additional tips to protect the drywall from moisture, especially with kids around. Any thoughts?
3 Answers
First things first, it sounds like addressing the seal is crucial. You're right about fixing the water pooling outside the door; make sure you get a good, continuous seal that fits snugly. Once that's sorted, consider adding a good paint job with water-resistant paint, and don't skip on caulking those joints – it's your first line against moisture! That said, definitely look into PVC trim; it will hold up much better in wet areas than wood!
There are some great options for glass shower door seals on Amazon. Make sure to find one that fits well and seals tightly against the wall and floor when the door is closed. Any gaps will let moisture escape and cause problems. But if you're already confident in that part, for the drywall, you might want to use moisture-resistant drywall or even Hardi board. Just make sure to cover it properly with a waterproof layer!
I appreciate the recommendations! I wanted to ensure whatever I used would hold up well over time, especially with water getting out sometimes around the hinge.
Honestly, a thorough clean-up, a quality paint job, and good caulking could do wonders. The paint acts as a barrier, but you will want to keep it maintained. If your drywall is still intact, just make sure to keep it dry and monitor it for any signs of damage! Think of it as prevention rather than a fix!
Great point! I'm definitely leaning towards upgrading the trim to PVC for durability. I want to make sure everything stays protected.