I'm trying to run ethernet cables through the walls and attic of my old house. The walls are made of plaster and lathe, with some areas having replaced drywall, but the lathe remains. I've already cut out holes and installed low voltage brackets, but I'm facing a challenge because there are both horizontal and vertical studs throughout the walls. The horizontal studs are making it tough to run cables down from the attic, and I really want to avoid running cables along the walls. Most of my ethernet ports will be on inner walls along a central wall that goes across multiple rooms. If necessary, I'm open to putting ports on the ceilings, but I'd prefer not to. I'm considering cutting vertical gaps in the wall and patching them up after the cables are run. Would this be the best approach, or does anyone have other suggestions? By the way, I'm currently relying on wifi, which isn't working well due to frequent dropouts, and other options like coax or power line adapters aren't feasible. Ethernet seems like the only reliable solution.
1 Answer
You might want to check out a flexible drill bit designed for running cables. They’re great for reaching spots in the wall that you can’t get to directly. There are plenty of options available, like from Milwaukee or Klein. Make sure to check the lengths; they come with extensions if you need to reach further than 4-6 feet. It could really simplify your installation!
That sounds handy! But I'm wondering if it can stay steady enough to navigate through the horizontal studs. I also need to fit at least three cables through one hole, but I can always create multiple openings if necessary.