I'm trying to figure out if a splitter that goes directly from a 1.5" output to two 3/4" hoses exists. Right now, my water pump has a 1.5" output that I've reduced to 3/4" for a garden hose with a watering wand. I have a basic hose splitter that lets me run two hoses, but I feel like I could get more output if I split directly from the 1.5" to two 3/4" hoses. I think the watering wands might be the bottleneck. Would switching to a direct splitter work better? Should I check at a plumbing supply store for this type of splitter or is it even worth it?
3 Answers
Honestly, switching to a splitter isn't likely to give you a noticeable increase in water flow. You're still dealing with the same restrictions in the lines, just moving them around. Right now, you’re reducing from 1.5" to 3/4" and then splitting to two 3/4" hoses. A splitter from 1.5" to two 3/4" hoses will just change how it splits but won't really boost your flow. You could make one yourself with a few PVC parts from a hardware store, which might be cheaper and just as effective. Just grab a 1.5" to 3/4" reducer and a 3/4" Y to DIY your splitter.
Just to add, water wands typically restrict flow too, so if you're looking for more output, you might want to consider what's on the hose's end. If you really want to maximize flow, it might be worth experimenting with different attachments and setups.
Changing out the pieces in your setup won't really change much in terms of flow. The transition from 1.5" to 3/4" is going to drop the pressure, no matter how you set it up. It would help to know your water pressure and the flow rate of your pump. Also, how you’re using the water—like are you connecting it to a sprinkler or just using a hose—can make a difference. A single 1.5" line should handle quite a bit, but it all depends on what's at the end of the hose!
That makes sense! So, would adding a 1.5" wye with 3/4" reducers on each side be the way to go?