I'm getting ready to revamp my room, which has seen quite a bit of wear from my various phases growing up. I've mounted tons of things using adhesive strips, and pulling them off has left a lot of ripped paint. Plus, during my producer phase, I had foam decorations stuck up, and now there's glued foam residue on the walls. I want to clean everything up, repaint the walls to look fresh, and I'm particularly aiming to paint two walls facing each other blue for my next era! What's the best way to tackle this?
3 Answers
If you're really looking for perfection, you might consider putting on a new layer of drywall. It can save you time and hassle, especially if mudding isn't your thing. Hiring someone to do that part isn't usually too pricey.
Sounds like a big project! You'll need to do a good amount of prep work. Start by using Goo Gone or a similar product to remove any sticky residue. For the ripped areas, lightly sand the edges, and consider using spackle to smooth things out. After that, apply a TSP wash to clean the walls before priming and painting. It's a process, but you'll get there!
You've got quite the project ahead! I recommend treating the problem spots with a Zinsser "PEEL STOP" primer first; it really helps with loose edges and binds everything down. Use a solid spackle like MH Ready Patch for filling in dents since it's tougher against any old adhesive. Once everything is smooth and clean, prime with latex, then paint with your choice of color. Just keep in mind that shinier finishes will show imperfections more than flat paints.
Good point! I didn’t think about the sheen affecting how smooth the walls look after painting.
Yes! The prep is key. And don't forget to do a light sanding over all the walls after spackling. It’ll help create a nice even surface for painting.