Hey folks! I'm working on a furniture project and trying to achieve a nice miter fold to create a waterfall edge look. I have a table saw, circular saw, and a DeWalt plunge router at my disposal. I know there are a few methods out there, but I'm looking to work with the tools I already have. I've seen some people cut a 'v' groove in plywood with a circular saw and guide, but that seems trickier than it sounds. Has anyone successfully used a 'v' groove bit in a router for this? What are your thoughts or tips?
4 Answers
I'd recommend going with a track saw if you can. Getting that precise 45-degree cut can be tricky since there are so many factors involved. Make sure your track is flat and not clamped too tightly to avoid any bowing. I've got three track saws, and I still hesitate when making 45s since they don't always come out perfectly! My Festool is the best for precision, but I find the Makita has a good anti-tip feature even if it’s a bit less precise.
Actually, the best router bit isn't just a plain V. For a smooth fold, there's a specific bit designed for that! It's not just about the V shape; it also carves out some space underneath to allow for a nice curve over the edge. You should definitely check into that bit!
I think I've seen the video you mentioned! The guy made it look super easy, but I think having a table saw is a solid choice. Just be patient and spend proper time setting your angle. Do some trial cuts on less expensive wood to verify your settings before working on your final piece.
Definitely use the table saw for this! Setting the angle accurately can be tricky since many table saws have their angles a bit off. If you have tools like a digital angle gauge or a bevel gauge, that would help a lot. For your first few test cuts, try setting your angle a little shallower or wider than 45, then adjust it based on how your miter fits together.