Hey everyone! I'm in the middle of a big painting job with a contractor and I'm feeling a bit confused. The crew initially told me we'd use one coat of Emerald matte paint for the walls and Promar 200 flat for the ceilings, which seemed straightforward. However, they switched things up on painting day, suggesting to do all the walls and ceilings in Promar first for speed, and then finish with a second coat of Emerald matte. Now, I'm seeing both Emerald matte and Promar flat being used on different walls and ceilings. The contractor told me that even though Sherwin Williams advises against mixing sheens, they often do it and it should be fine as long as the second coat is all Emerald matte. I'm just worried if this is going to cause problems down the line since I'm spending quite a bit—$8,500! Can anyone weigh in on whether this mix of sheens is a bad idea or if it really won't be an issue?
2 Answers
It sounds like you're dealing with a bit of a mix-up, but honestly, it's not the end of the world. Emerald and Promar are different lines, but matte and flat finishes are pretty similar! As long as the last coat is the Emerald matte, you should be okay. Just keep an eye on how it looks after everything dries, and let your contractor know about any concerns. If you're seeing streaks, it's good to mention that so they can address it before moving to the final coat.
I'm no pro, but I think as long as you're getting good coverage with that second coat of Emerald, it should help blend any differences. Mixing can sometimes lead to a subtle texture or sheen difference, but it sounds like your crew is experienced with this. Just make sure the final result meets your expectations—after all, that's what you're paying for!
I agree with you! Just ensure that they do a consistent coat of Emerald on everything as planned. I think once they do the final coat, it'll even out. Fingers crossed for a smooth finish!