Hey everyone! I'm trying to set up a temporary fence in the backyard of my rental unit. I live in a duplex and share the yard with my neighbor, and we both have dogs. The main goal is to create a 15-foot barrier to keep our dogs separated and add a bit of privacy. My spouse and I are considering using livestock fencing attached to 4x4 posts, but we're hoping to find ways to install the fence with minimal or no digging. Any ideas or suggestions would be super helpful! Thanks!
4 Answers
While no-dig options are nice, don't forget you'll need something to keep the fence standing, especially in the wind. I suggest digging at least a couple feet for the posts or using steel posts embedded with concrete, as they last longer without rotting. I did it in my yard with cedar rails, and it’s looked great and held up really well. Just a thought!
I think using some sturdy green stakes with welded wire might be your best bet—it’s budget-friendly and requires minimal installation. Just keep in mind that if your dogs are big or rowdy, this might not hold them back completely. Check these out: [Welded Wire](https://www.homedepot.com/p/Everbilt-4-ft-x-50-ft-Galvanized-Steel-Green-PVC-Coated-Welded-Wire-308352EB/205960862) and [T-Posts](https://www.homedepot.com/p/Everbilt-1-3-4-in-x-3-1-2-in-x-5-ft-Green-Steel-Fence-T-Post-with-Anchor-Plate-901174EB/205960890).
You might want to check out ground spikes! They're a solid option for a temporary fence without causing any damage to the ground. Just hammer them in, and you're good to go! Here’s a link to one type: [Ground Spike](https://www.homedepot.ca/product/peak-36-inch-steel-ground-spike-for-4x4-post-installation/1000438984?eid=PS_GO_140203__ALL_PLA-526641&pid=1000438984&store=7118&gStoreCode=7118&gQT=1). There are also some larger screw types, but they can be a pain if you're not using a machine to drive them in.
I’d recommend small steel posts that can be driven into the ground. Pair them with some basic chain link fencing, and it's super easy to install. You can rent a gas-powered driver for the posts, and when you’re done, just rock them back and forth to pull them out—no fuss at all!