I'm setting up a new shop on my property where I'll need both 110V and 220V power. I've got a 110V outlet near the building, but I occasionally need 220V to run equipment like a welder lift for short bursts. I'm curious if I can connect the 110V shore power to a battery system that could provide 220V, or if it's better to just run a new power line from the pole. I'm considering the Anker Solix F3800 with a breaker panel but am not sure if it would work for what I need. Any thoughts on whether this setup is feasible? Also, I'd like to use the Anker for backup power in case of outages. Let me know if you need more details or have questions. Thanks in advance!
3 Answers
You can definitely buy or build a solution! However, if you're looking at a longer distance, running a new 240V circuit from the pole might be much easier. If you’re up for a bit of DIY, building a portable battery setup is an option too. I made a 120V version for my daughter, and a 240V one wouldn’t be too hard either. Throwing in a couple of solar panels could also help you out during outages. Just keep in mind, the bigger the battery, the heavier it gets! You might want to think about putting it on a cart or wagon for easier transport.
Have you considered running a second hot wire to create a 220V setup from your existing 110V? In the US, 220V systems typically have four wires (2 hots, 1 neutral, 1 ground), while 110V has three (1 hot, 1 neutral, 1 ground). At the breaker panel, you’d need a double-wide breaker to accommodate 220V, which would connect to both hot legs. Just make sure you’re comfortable with electrical work before diving into that!
Having worked with Anker products, I can definitely help out! The Anker Solix can take in 110V input and supply power through its panel, but you’d want to ensure all connections are properly rated for safety. It sounds like a good backup power solution for your building too!