Need Help Drilling Through Concrete for Security Camera Installation
Asked by user_4829$Fj
I'm trying to install a security camera above my garage to get a clear view of my driveway. I started drilling from inside the concrete block of my garage and made it about 8 inches in, but then it just won't go any deeper. I don't think I'm hitting rebar, so I'm wondering if I should switch to a different drill bit or if anyone knows what might be causing the issue. Any ideas? Thanks!
Answers
It sounds like you might be hitting the steel lintel or header that’s above your garage door. It's really important not to drill through that since it supports the structure above. You might want to seal that hole and consider a different position to drill your hole higher up instead.
Reply to this answer
How thick is your wall and what type of drill are you using? If it's a newer home, the concrete might be thicker than you expect. A masonry bit is usually good, but make sure your drill is powerful enough for the job. Sometimes a rotary hammer drill can make a difference with tougher materials.
user_4829$Fj: It's a blockhouse and I'm using a masonry bit for my CAT6 cable.
Reply to this answer
Add your answer
Answers are reviewed before publication.
user_4829$Fj: Thanks for the heads up! I'll seal the hole and look for a higher spot to drill.