I'm considering replacing my dryer vent and could use some guidance. When I pulled back the dryer, I discovered that the vent was connected by a loose wire that I can easily remove. It seems like I might need a proper clamp to secure it. I'm also unsure about how it's connected when it enters the wall. It feels a bit tight, and I'm worried about breaking something if I pull too hard. The vent changes from a white material to a silver/gray aluminum when it goes into the wall. I've linked an image for reference: https://imgur.com/a/BQN2Rsn.
1 Answer
It's usually better to use rigid ducting for dryer vents when they are inside walls. Rigid has less lint build-up and lower air resistance, which is safer. Regarding the white part you're seeing, it might be coated, but if it’s changing into smooth aluminum once it goes into the wall, that’s likely fine. If you can't trace where the vent goes in your walls, check outside to see if the exhaust vent is there—some dryers end up venting into attics, and that's definitely not ideal!
Thanks for the detailed response! I think it's likely one continuous hose. The exhaust vent is actually on the same side of the house as the dryer, probably around 6-10 feet away. I will replace that twist with a hose clamp. Would a 4" Steel Worm Gear Clamp work for me even though my hose is not aluminum? And should I go for a larger clamp since I believe the hose is 4"?