Rikon vs. Bauer Bandsaw: Which One Should I Pick?
I'm trying to decide between the Rikon 10" 1/2 HP bandsaw and the Bauer 14" 1 HP bandsaw. I know Rikon has a better reputation, but I'm on…
bandsaw
Is the Bauer Bandsaw Worth It for Beginners?
I'm looking to buy a starter bandsaw for my small workshop, mainly for furniture making. I think it would really help with cutting curves, resawing, and rough cut…
What’s the Best Basic Bandsaw for Cutting Wood Cookies?
I'm looking to make wood cookie slices from tree branches that are about 8-15 cm in diameter, including birch and aspen. I've found a few 9-inch bandsaws that…
How to Choose the Right Bandsaw Blade Tooth Count?
I'm trying to figure out how to select the correct tooth count for my bandsaw blades. I know that a smaller blade is better for cutting tight curves…
Help with Bandsaw Blade Wobble: Seeking Advice and Tips
I've been struggling with a problem on my new Rikon 10-353 bandsaw—specifically, the blades are wobbling back and forth and chattering against the thrust bearing. Just to clarify,…
Help! Bandsaw Motor Stalling When Cutting Thick Wood
I have a Rikon 14" Bandsaw model 10 324 that I've been using with a standard 110 outlet, which the instructions say should work fine. However, I'm experiencing…
Help! My Bandsaw Wheel Bearing is Loose – What Did I Do Wrong?
I'm managing a makerspace and recently discovered a major issue with one of our Powermatic PM1500 bandsaws. The lower wheel wobbles significantly during operation, and despite adjusting the…
What's the Best Budget Saw for My Workshop?
I'm getting into woodworking and need some guidance on choosing my first saw. I have experience working in other people's workshops but haven't set up my own yet.…
Understanding Voltage Ratings: 380V, 220V, and 415V for Tools
Hey everyone! I'm considering buying a bandsaw, specifically the mj344 model, but I noticed something confusing on the specs. It's listed as 220V/380V/415V, and I'm unsure what that…
Best Tools for Making Curved Cuts in Thin Wood?
I'm new to woodworking and I've got some thin wood planks that are just 1/8" thick, but they tend to splinter easily. Can anyone recommend the best tools…
What’s the Best Bandsaw and Drill Press for My Garage Shop?
I recently received a $1,000 gift card from Home Depot due to some appliance repair issues, and I want to invest in new tools for my garage shop.…
Which Tool Should I Buy Next: A Jointer or Bandsaw?
I've been getting into woodworking for about a year now, mainly working in my garage. I've built some small furniture pieces like benches and shelves, and so far…
Looking for Bandsaw Advice for Resawing Wood
I'm pretty new to woodworking and tools in general, but I really want to learn how to resaw different kinds of wood for my laser projects. I've got…
How to Cut a 1" Board to Keep the Extra Thickness?
I'm about to embark on a woodworking project and I'm excited to visit a local lumberyard for some hardwood instead of the standard boards from big box stores.…
Should I Invest in a Jointer for My Woodworking?
I'm currently milling around 50 to 100 board feet each week and I have a DeWalt 13" planer and a 3hp cabinet saw. My setup involves using an…
Are BusyBee Tools Worth It?
Hey everyone! I'm currently on the lookout for a bandsaw and I've come across BusyBee's own tool brand. They seem appealing since they're priced lower than many competitors…
Why Did My Bandsaw Blade Break When I Weren't Even Cutting?
I had a strange incident with my bandsaw today. I had just finished making a cut and was getting ready for another one when suddenly the blade broke…
Is the Hercules Dust Extractor Enough for My Garage Shop?
I'm setting up a small woodworking shop in my garage, and I'm trying to get my dust collection system sorted out. I have a few beginner questions: 1)…
Comparing Jet and Laguna Bandsaws - Need Your Insights!
Hey everyone! I'm looking to hear from anyone who's owned or currently owns a Jet or Laguna bandsaw. What are your thoughts on them? I'm particularly interested in…
Best Method for Ripping 2x12 Lumber?
I'm planning to build a Moravian workbench using some construction-grade Douglas Fir wood, and I've got a couple of 2x12 boards from the big box store. To laminate…