What's the Best Angle for Dovetails in Plywood?
I'm trying to make a small box using some 1/2" plywood I have lying around. It's not for decoration—just building a pinhole camera for fun. I've successfully made…
beginner woodworking
Tips for Safe Table Saw Use with Short Cutoffs
I'm a beginner woodworker and just picked up a used table saw. I recently got my hands on an Incra 5000 sled and miter that works like a…
What’s the Best Basic Bandsaw for Cutting Wood Cookies?
I'm looking to make wood cookie slices from tree branches that are about 8-15 cm in diameter, including birch and aspen. I've found a few 9-inch bandsaws that…
Why Does My 23 Gauge Pin Nailer Keep Bending Pins in Wood?
I'm having a bit of trouble with my 23 gauge pin nailer. It seems like I'm doing something wrong, but I can't quite figure it out. Unlike with…
Got Any Cool Ideas for Using White Oak Scrap Wood?
I've got a bunch of white oak scrap wood that's about 3 inches wide and 3-4 feet long, but it's only around 1/4 inch thick. I'm looking to…
Need Help Building My First Bed Frame – What's the Process?
Hey everyone, I'm a total beginner at woodworking and I'm interested in building my own bed frame since buying one is just too pricey for me. I haven't…
Looking for Recommendations on a Good Mitre Saw
Hey everyone! I'm trying to find a decent mitre saw, but I'm located in the UK, which limits my choices a bit. I'm fairly new to woodworking and…
Best Recommendations for a Budget Combination Square?
I'm in the market for a combination square and could use some recommendations! I'm leaning towards a 6-inch square since I'm focusing on smaller projects, but I'm also…
Is Mortise and Tenon Joinery a Good Choice for My Garage Shelf?
I'm designing a storage shelf for chemicals and other items in my garage using Fusion 360. I'm wondering if mortise and tenon joinery is appropriate for this application.…
Trying to Decide: Upgrade My Miter Saw or Table Saw?
I've been dabbling in woodworking for about two years, but once it gets too cold in my garage, I have to pause my projects. I started with a…
Is Red Maple Suitable for Cutting Boards and Other Projects?
I found some "Red Leaf Maple" shorts on Facebook Marketplace for a great price and was considering using them for cutting boards. However, I came across some information…
Why is My Wood So Difficult to Carve?
Hey there! I'm new to woodcarving and I'm facing a bit of a struggle with a piece of wood. One section is really easy to cut through, but…
Looking for Recommendations on Big Box Table Saws for Home Projects
I'm on the hunt for a new table saw after my old Skilsaw finally gave up. I'm not quite a beginner but still learning, focusing mainly on homeowner…
Is a 20-Year-Old Festool Router Worth Buying?
Hey everyone! I'm diving into woodworking and considering investing in some quality tools. I've come across a Festool OF 900 E router that's about 20 years old. The…
Best Ways to Secure Wood for Carving?
Hey everyone! I'm diving into wood relief carving as a new hobby since I'm recovering from a foot injury. I'm just getting started and looking to buy my…
Best Shop Vac Recommendations for Woodworking
Hey fellow woodworkers! I'm diving into a bench table project and the dust situation is getting way out of hand! I'm thinking about picking up a shop vac…
Alternatives to a Table Saw for Cutting Long, Thin Wood Strips?
I'm new to woodworking and I found a project that requires cutting 1/4-inch wide, 12-foot long strips of ash. The problem is, I don't have a table saw,…
Best Saw for DIY Projects: Which One Should I Choose?
I'm diving into some DIY projects around the house and I'm looking for advice on what type of saw would be the best fit for various tasks. I've…
Does Kickback Happen with Miter Saws?
I came across a conversation about kickback on table saws and someone mentioned experiencing it on a miter saw instead. I wasn't aware that kickback could be an…
What are the best safety tips for using a drawknife?
Hey everyone! I'm diving into woodworking and I've got my eyes set on using a drawknife. I've heard that the usual rule of not cutting towards your body…