Tips for Building a Roubo Frame Saw: What to Know Before You Start
I just got a 48-inch Roubo frame saw kit from Blackburn Tools and I'm about to buy some 8/4 cherry wood soon. As I'm mapping out my build,…
DIY tools
Is it Possible to Sharpen Rasps?
I'm wondering if rasps can be sharpened in ways other than etching them with vinegar or acid. I've heard there are services out there that specialize in sharpening…
How to Create a Wooden Plane with a Depth Adjustment Feature?
I'm looking to craft a wooden smoothing plane that includes a depth adjustment feature similar to what's found in metal-bodied planes. I find setting the depth on traditional…
My Parkside 20V Drill Just Stopped Working—Is This Common?
I have a Parkside PABS 20-Li I9 drill that suddenly stopped working while I was using it. I'm using a 20V 8Ah performance battery, and when I pull…
How to Make a Wooden Cabinet Scraper?
I'm trying to craft a cabinet scraper similar to the Stanley models 80 or 81 using wood. I want to make the blade from a piece of bandsaw…
What's the Best Device to Hold a Cable in Place?
I'm in search of a device that can hold a cable at any position by squeezing it. The cable I have goes through a pulley and supports a…
Is a B Grade Granite Surface Plate Worth It for Flattening Hand Plane Soles?
I've been having a blast collecting and restoring vintage hand planes, and I'm considering whether a budget B grade granite surface plate would be a decent setup for…
M12 Circular Saw vs. Corded Models: What's the Verdict?
I'm in the market for a new circular saw to replace my old rigid model. I've noticed that the M12 is at the same price point as the…
What’s the Best Basic Bandsaw for Cutting Wood Cookies?
I'm looking to make wood cookie slices from tree branches that are about 8-15 cm in diameter, including birch and aspen. I've found a few 9-inch bandsaws that…
M12 vs M18 Brad Nailer: Which One Should I Choose?
I'm a hobbyist working on a project to build a library and built-in bookshelves for my wife. Throughout this project, I'll definitely need a Brad nailer, and I'm…
Did I Just Score an 887b Driver at a Steal?
So, I recently got a bit of a surprise when my older brushed driver started giving off a faint whiff of smoke. To avoid any work delays, I…
M12 Gen 2 Stubby vs M18 Mid-Torque: Which Impact Wrench Should I Choose?
Hey folks! I'm trying to decide between the M12 Gen 2 Stubby and the M18 Mid-Torque impact wrenches for my DIY projects as a home mechanic. After diving…
Is a Router Necessary for 45-Degree Cuts in Plywood for a Picture Frame?
I'm planning to make a picture frame out of 12mm plywood, with a nice wide edge of around 100mm. I'd like to bevel the edges at a 45-degree…
Which Tool Should I Use: Impact Driver or Hammer Drill?
I'm new to some maintenance tasks at work and need to drill screws through parquet and into concrete. I'm trying to figure out if I need an impact…
What's the best way to hack the M12 stubby deal?
I found an M12 stubby deal on the HD app for $199 plus tax, which includes two 3Ah batteries. I've never attempted a hack before, and I'm curious…
What’s the Best Tool for Precise Cross Cuts on Stair Treads?
Hey everyone! I'm planning to replace the carpet on my stairs with hardwood treads and I want to know which tool would be best for making precise cross…
Should I Choose a 3/8 or 1/2 Stubby Impact Wrench for My DIY Projects?
I'm planning to buy my first stubby impact wrench during Ohio's no sales tax holiday, but I'm stuck on whether to go with a 3/8 or a 1/2.…
Which is Better: M12 Surge or M12 Fuel for Home DIY and Car Work?
Hey everyone! I'm diving into the M12 tool line and I've come across two options: an M12 Surge along with a ratchet for $159 and a Fuel combo…
Need Help Sharpening a Card Scraper for Working with Padouk
I'm working on a project to create a Coffin plane using Padouk as a gift, but I've run into some challenges. Although Padouk is known for being easy…
M12 vs M18: Which Oscillating Tool Should I Buy?
I'm in the market for an oscillating tool and I'm weighing my options between the M12 and M18 models. I already own batteries for both, so I'm mainly…