DIY Garage Floor Epoxy: Should I Leave Concrete Rough?
I'm gearing up to apply epoxy on my garage floor once my new house is done. I've heard that prepping the concrete surface is crucial for a good…
epoxy
Best Way to Waterproof Wooden Mugs: Epoxy or Linseed Oil?
Hey everyone! I'm new to woodworking and I've made a few simple projects like jewelry boxes and coat racks. Now I'm looking to step it up and try…
What are the best DIY methods for achieving a polished concrete look on plywood?
Hey everyone! I'm working on a flooring project for about 575 sq ft and want to recreate that polished concrete or microcement finish. I'm hoping to go the…
Can I Just Use Wood Filler on a Rotted Door Frame?
I've got this pesky issue with the bottom two inches of my exterior garage door frame—it's rotted. I've stumbled upon some YouTube videos showing how to cut out…
What’s Better for Filling Knots: Epoxy or Polyurethane?
Hey everyone! I'm a newbie in woodworking and I'm currently working on a set of cornhole boards that I stained with a pretty cool pattern. The wood I'm…
How to Achieve a Shiny, Plastic-Like Finish on Wood?
I'm looking for some tips on how to make wood surfaces, like dining tables or cabinets, look shiny and plastic-like. I've seen this finish before, where you can…
Polyurethane vs Epoxy for Workbench Finish: What's Best?
I'm building some long assembly tables out of 3/4" sanded plywood and want to know which finish is more durable: water-based poly or epoxy? We've already tried water-based…
Is Cedar a Good Choice Over MDF for a Bathroom Countertop?
I'm considering building a small bathroom countertop using MDF or a similar material that may be waterproof. My plan is to glue some 1/2" x 6" cedar planks…
Best Ways to Inlay Steel into Wood for a Magnetic Board?
I'm creating a wooden panel where I want to inlay a strip of steel that will hold notes using magnets, similar to a refrigerator door setup. I plan…
Is 30-Minute Epoxy a Good Choice for Mortise and Tenon Joints?
I'm working on a walnut shaker-style dining room table and need some advice. Some of the mortise and tenon joints are a bit looser than I'd like. They're…
Do I Need to Treat a Wooden Fishing Net to Keep It From Falling Apart?
I'm considering making some wooden fishing nets, but I'm unsure if they require any special treatment to make sure they don't deteriorate over time. I've heard that resin…
Best Method to Repair a Brass Lampshade: Solder or Adhesive?
I've got a brass lampshade where the neck is connected to the body, but it sustained some damage during shipping. I have an electronics soldering iron and some…
Can I Use Epoxy to Seal My Plywood Floor on a Budget?
Hey everyone! I just pulled up the carpet in my home because of my pets, but installing new flooring is going to break the bank. I'm wondering if…
Looking for Alternatives to Epoxy Resin for Wood Projects
I'm trying to find alternatives to epoxy resin for my woodworking projects, particularly for table tops. I find that traditional resin can be quite expensive, messy, and has…
Can I Apply Resin or Epoxy to My Concrete Floor Myself?
Hey everyone! I'm trying to turn my warehouse space into an art studio, but the concrete floor is super dusty and not great for health. I don't need…
Best Woods and Finishes for a Shower Rack?
I'm looking to build a small rack for soaps and shampoos that will be placed in the corner of my shower. I'm not sure what type of wood…
Should I Use Wood Glue or Gorilla Epoxy for My Guitar Project?
Hey everyone! I'm currently working on a guitar, and I'm debating which adhesive to use. Typically, wood glue is the go-to, but I've modified my project a bit.…
Best Glue for Attaching Stainless Steel to Marble and Glass
I'm looking to attach a stainless steel towel hanger to both a marble wall in my bathroom and a glass wall. The load will be around 10kg (approximately…
Do I Really Need Bowties or Epoxy for My Wood Project?
I've got some wood pieces that have been sitting for about five years, and they have various checks and openings. It's pretty thick wood, so I'm wondering if…
How Can I Create a Non-Square Epoxy Mold for My Desk?
Hey everyone! I'm in the process of crafting a desk from a gorgeous maple slab. One edge of the slab has a live edge and is not square,…