How can I fix my slipping drill press?
I've got a Jet JDP-17DX drill press that's about 10 years old, and it's been slipping whenever I apply pressure with the drill bit. I took the belt…
maintenance
Why is my kitchen backsplash grout crumbling and leaving white residue?
I'm dealing with a problem where the grout in my kitchen backsplash seems to crumble easily when I press on it. It feels chalky and some of it…
Is it Possible to Sharpen Rasps?
I'm wondering if rasps can be sharpened in ways other than etching them with vinegar or acid. I've heard there are services out there that specialize in sharpening…
Is My New Driveway Ruined After Getting Wet from Neighbor's Sprinklers?
Hey everyone! I just had my driveway redone with new concrete yesterday at around 5 PM. This morning, I noticed that my neighbor's sprinklers accidentally splashed some areas…
How Can I Fix a Warped Butcher Block?
I've got a pretty heavy butcher block that I've been using for a while, but I've noticed it's warped at the bottom so much that I can spin…
Why Is It So Hard to Find a Good Gardener?
I've been struggling to find a gardener who understands that constantly using a strimmer on all plants isn't the way to go! My climbing roses on the fence…
Why won't my air compressor go past 30psi?
I just got an air compressor that seems to be stuck at 30psi. It builds pressure up to that point and holds it fine, but it just keeps…
Can My Power Tools Survive Being Submerged in Water?
Hey everyone, my garage recently flooded and I discovered that a few of my power tools, including an angle grinder, oscillating multi-tool, and jigsaw, were completely submerged in…
Why is One of My 12V Batteries in Series Voltage So Low?
I have a small system with two matching 12V 100 Ah batteries connected in series. I've taken good care of them, but recently I noticed that one battery…
Tips for Removing a Stuck Packing Nut on a Hose Bib
I'm dealing with a stubborn packing nut on my hose bib that's completely stuck, and I'm starting to worry I'll strip the brass. I've got a slow leak…
Is it okay to peel paint off before the painters return?
I'm currently having my house painted by a top-rated company, and given the hefty price tag of around $23k, I want to ensure the job lasts as long…
Why does my chainsaw keep stalling when I touch the chain?
I've got a chainsaw that starts up fine and runs, but as soon as I touch the chain to even a twig, it just stops. I've made sure…
Should I Remove Coins and Earrings from My Bathroom Sink Drain?
I dropped some metal earrings and a coin into my bathroom sink drain, and I'm wondering if it's really necessary to remove them or if I can just…
Help! Issues with Oiler on My M18 Chainsaw
I'm facing a problem with my M18 Chainsaw where the oiler is not functioning properly. It's pushing out some oil, but not enough, and I've already backflushed the…
Can I Tile the Riser of My Wooden Stairs?
I'm thinking about tiling the risers on my wooden staircase. Is this a feasible idea or just a recipe for disaster? I'm open to any tips or advice…
How to Fix or Replace My Shower Door Sweep?
Hey everyone! I'm a longtime lurker but decided to jump in as a new homeowner. We bought our house from a flipper we really can't stand, and I've…
What's Up with the Yellow Spots on My Granite Countertop?
Hey everyone! I just moved into a new apartment and everything seemed fine during my inspection. But a few days later, I noticed some small, irregular yellow spots…
Is Old Paint Safe to Use on My Ceilings?
I've been living in my house for over a decade, and I found a bucket of unopened paint (about 5 or 10 gallons) that came with the place.…
Should I Replace My Water Heater Since I'm Renovating?
I'm in the process of renovating my laundry room and need to move my GE water heater to lay down new tile. The heater is 14 years old,…
What's the Difference in Size Between 3/8 and 1/2 Impact Tools and Sockets?
I've been doing maintenance on my 4Runner and some other projects over the past year, and I've heard a lot about the size advantages of using 3/8 impact…