How to Dispose of Water-Based Polyurethane Rags Safely?
Hey everyone! I'm a bit of a fire safety nut when it comes to oil-based polyurethane rags, so I treat those with a lot of caution. I usually…
polyurethane
Why Is My Polyurethane Spraying Leaving Orange Peel?
I'm working on a cabinet and used Halcyon polyurethane for the finish. The first coat went on perfectly, but I've noticed that each subsequent coat has developed more…
Is it possible to paint over old polyurethane on wood paneling?
I'm looking to brighten up my family room, which has knotty pine tongue and groove paneling. It was coated with an oil-based polyurethane about 25 years ago. My…
How to Fix a Cloudy Finish After Polyurethane?
I recently applied a water-based polyurethane, but I noticed some small bumps on the final coat, likely from dust. After sanding it down with 3000 grit sandpaper, the…
How to Fix Brush Strokes After Applying Polycrylic?
I'm new to woodworking and just finished building a table. I stained it and applied a coat of Polycrylic, but it dried faster than I expected, leaving some…
Struggling with Streaks in My Polyurethane Finish – Need Tips!
Hey folks! I recently applied a coat of fast-drying semi-gloss polyurethane in my garage where it was around 95°F, and it dried way too quickly. This led to…
When Can I Bring My Polyurethane-Finished Furniture Inside?
I recently refinished some dressers and applied the last coat of polyurethane today (Friday). I'm wondering how long I should wait before bringing them inside since they're currently…
Advice Needed on Finishing My Mahogany Guitar
Hey everyone! Back in high school, I built a mahogany-body telecaster in my woodshop class, and it's been my pride and joy for the last decade. Recently, I…
Why Is My Stain Turning Orange After Application?
I'm having some trouble with a stain I'm applying. I started spot treating a stain and managed to sand it down enough that the remaining black streaks aren't…
What’s Better for Filling Knots: Epoxy or Polyurethane?
Hey everyone! I'm a newbie in woodworking and I'm currently working on a set of cornhole boards that I stained with a pretty cool pattern. The wood I'm…
How Long Should I Wait for Polyurethane Fumes to Dissipate?
I just had a coffee table and TV stand made with a polyurethane finish, and my boyfriend's dad, who built them, suggested leaving them out in the garage…
Best Waterproof Finishes for Walnut Plywood: Seeking Recommendations
I'm working on a walnut plywood sideboard and plan to place an espresso machine on top. Although I'm using a silicone mat, I still want to protect against…
Polyurethane vs Epoxy for Workbench Finish: What's Best?
I'm building some long assembly tables out of 3/4" sanded plywood and want to know which finish is more durable: water-based poly or epoxy? We've already tried water-based…
Can I Use a Spray Gun for Water-Based Polyurethane?
I'm curious if I can use a spray gun to apply water-based polyurethane, or if I need to stick to applying it by hand. Any tips or advice…
What's the Best Way to Dispose of a Polyurethane Brush?
I'm trying to figure out the best way to get rid of a brush that I used for applying polyurethane. I've found a lot of info about disposing…
Best Ways to Seal Wood for Alcohol Use?
Hey everyone, So I recently found myself with a router table (not really a woodworker here!). I'm looking to try out a project where I carve some channels…
How Long to Wait for Tacky Polyurethane on Stairs?
Hey everyone, I'm in the middle of refinishing some older pine stairs and I've hit a couple snags. I'm dealing with tacky polyurethane and I'm wondering how long…
Is it Safe to Thin Polyurethane More Than Recommended?
I've got a quick question about thinning polyurethane. I use a two-component polyurethane that consists of a base and a hardener. The can states that I should dilute…
Is it Possible to Just Use Polyurethane on OSB Floors?
I'm transforming my small 10'x10' room into a paint and art studio, and I'm removing the old carpet. I'm contemplating whether I can simply apply polyurethane over the…
Can I Apply Polyurethane Over Existing Finish Without Sanding It Down Completely?
I've got a nice table that was finished last year, and I want to keep it looking good since we use it outdoors. I'm planning to add another…