Dealing with an Uneven Table Saw Top: What's the Best Solution?
Hey folks, I'm having a bit of a problem with my DeWalt DWE7491RS table saw. I've set it up in my workbench, but the aluminum top isn't level;…
tool maintenance
Why Does My Compound Miter Saw Stop When Cutting Wood?
I have a SKIL Compound Miter Saw, and I've run into a weird issue. Whenever I try to cut wood, it stops almost immediately after touching the material.…
Why Would My String Trimmer Stop Working After a Drop?
I was using my brand new string trimmer for about 45 minutes when I stumbled upon a yellow jacket nest. After a few stings, I dropped the trimmer…
Which Jack Plane Should I Buy?
I'm planning to get a no. 5 jack plane and I could use some advice on what brand to choose. Also, I'm curious about whether a corrugated sole…
Restoring a Vintage Stanley Plane: Should I Keep the Paint or Strip It?
Hey everyone! I'm new to the forum and just picked up what I think is a vintage Stanley plane at a flea market for a few bucks. It's…
What's the Deal with Hand Planing Pressure-Treated Cedar?
I have some pressure-treated 4x4s that I've rough milled down to 1x4 for an outdoor furniture project. They're not as flat as I need them to be, and…
Best Ways to Sharpen Turning Tools Without Expensive Equipment?
My dad just got his first lathe along with a variety of turning tools, but he can't afford fancy sharpening machines like a Tormek or Pro Edge. He…
Will My 192-Piece Tool Set Rust? Need Tips!
I recently bought a budget-friendly 192-piece tool set from Home Depot to keep in my Mule UTV for quick fixes around my rural property. I don't mind some…
How to Fix a Stuck Bit in a Milwaukee M12 Impact Driver?
I'm having trouble with my Milwaukee M12 impact driver because the bit is stuck in the chuck. I've heard about pulling the knurled piece at the base to…
Help! My DeWalt 20V MAX XR Drill Won't Charge—What Should I Do?
Hey everyone! I'm a 30-year-old woman who's trying to be independent after a recent move and divorce—doing all my installations by myself, which is a huge step for…
Which is Better for Protecting Tools from Rust: Oil or Paste Wax?
I'm looking to protect my high-quality chisels, gouges, hand planes, and other hand tools from rust damage. Should I go with a thin layer of oil, or will…
Why is my SDS drill turning by hand on the chisel setting?
Hey everyone! I have a bit of a problem with my SDS drill. It can still be turned manually even when it's set to the chisel mode, and…
How to Fix a Thin Kerf Blade Issue on My DeWalt Miter Saw?
Hey everyone! I just bought a DeWalt miter saw and decided to upgrade the blade with a Diablo one. However, I'm having a problem - the new blade…
How to Fix a Stuck Blade in My Hackzall Fuel Chuck?
Hey everyone! I'm dealing with a stuck blade in my Hackzall Fuel chuck. I can turn the chuck fully, and it feels like it wants to move, but…
Have I Damaged My Atoma Sharpening Stones?
Hey everyone! I recently purchased a set of Atoma sharpening stones (140, 400, and 1200 grits) from Amazon to kickstart my knife and plane iron sharpening journey. Initially,…
How Do You Use a Ratcheting Carpenter Brace Effectively?
I recently bought a ratcheting carpenter brace and I'm struggling a bit with it. I get the general idea, but I'm facing some issues. While making holes, it's…
Help! My Festool Domino Won't Turn Off - What Could Be Wrong?
Hey everyone, I'm having an issue with my Festool domino machine. It won't turn off, no matter if it's plugged directly into the wall or connected to my…
How Can I Fix My Stanley No. 5's Lateral Adjustment Issue?
I've run into a problem with the lateral adjuster on my Stanley No. 5, Type 13. It used to have a slight amount of play, but now it…
Should I Use Wax or Oil on My Table Saw?
I'm trying to maintain my late dad's table saw, which has sentimental value as it belonged to both him and my grandfather. When I was younger, I recall…
How Should I Manage Battery Usage for My Multi-Battery Tools?
I've got a mix of tools that use different numbers of batteries. Some tools only take one battery (like my impacts and drills), while others take two (like…