Can I Use a VATRER LiFePO4 Battery with My Victron Setup?
I'm planning to swap out my aging 660 Ah AGM battery bank, which gives about 3.25 kWh of usable energy, for a VATRER 12.8 V 460 Ah LiFePO4…
Victron
Why Does My Fuse Keep Blowing?
Hey everyone! I recently came back to my camper after being away for two weeks and found that my 30amp AGU fuse blew. This fuse is connected between…
Struggling with My DIY Solar Panel Setup and Victron Controllers
Hey everyone! I recently built my own solar panels, and I'm facing some challenges. My latest panel is rated at 300 Watts, but I'm having trouble measuring the…
Can I Go Off-Grid with My Current Solar Setup?
I have two solar systems installed on my property and I'm wondering if I can use them for off-grid power. One system is an Enphase grid-tied setup that…
What's the Best Battery Setup for My Solar Project?
Hey everyone! I just bought some land and I'm gearing up to develop it. Since I plan to use solar power for most of my energy needs, I'm…
Is it necessary to add a safety margin to the MPPT charge current?
Hey solar enthusiasts! I'm putting together the solar array for my camper and have hit a bit of a snag in selecting the right size for my MPPT…
What are the best inverter options for low startup voltage with a 48V battery?
I'm looking to operate a 120V AC unit using a 48V battery, and I want to incorporate a hybrid inverter that works well with solar power. The problem…
Struggling with Victron MPPT: Need Insights
I've set up a Victron Solar Charge Controller 150/35 on my camper, connecting it to two 200-watt solar panels and a 12-volt Lifepo4 battery. Initially, the panels were…
Can I safely over panel my solar system?
I have a Victron 150/35 MPPT solar charge controller that supports up to 2000W for a 48V system. Currently, I only reach the 2000W limit during solar noon.…
Looking for Passthrough Inverter Options for Solar in My RV
I'm setting up a solar-powered LifePO4 system in my 5th wheel RV and planning on going with a 24-volt setup. Since my camper is older and not designed…