What's the Best Side for a Vice on My Workbench?
Hey everyone! I'm right-handed and I'm in the market for a new workbench. I'm a bit unsure about where to place the vice. Should it be on the…
workbench
Should I Combine Moravian and Nicholson Workbench Designs?
Hey all, I'm planning to build my first workbench and have a 1500x600x85mm slab of laminated timber ready for the top. I've been leaning towards the Moravian design…
Best Placement for Workbench Legs: Corner vs. Inset?
I'm gearing up to build my first workbench, and I've got a few ideas rattling around. The dimensions are about 36 inches long and 20-25 inches wide. Initially,…
Can I Use an Old Laminate Countertop for a Workbench?
Hey everyone! I'm a total newbie and just bought my first home. I've got a lot of my dad's tools and I'm excited to start learning. One of…
Do I Need Cross-Braces for My Rolling Workbench?
I'm working on building a rolling workbench with a pocket hole constructed frame. The top will be 3/4" thick, and there's going to be a shelf at the…
Polyurethane vs Epoxy for Workbench Finish: What's Best?
I'm building some long assembly tables out of 3/4" sanded plywood and want to know which finish is more durable: water-based poly or epoxy? We've already tried water-based…
Has anyone tried using Richlite for a workbench?
I'm currently in the process of designing a workbench and I'm looking for materials that can give me a sleek black finish without resorting to Formica laminate sheets.…
Best Sealer Options for MDF Workbench?
I'm currently building a workbench for my garage using MDF for the top, but I'm not planning to paint it or anything flashy. I definitely want to seal…
How to Splice MDF for a Workbench Top?
I'm trying to figure out the best method to splice together a 3/4" MDF board. I need to attach a 1-foot piece to a 6-foot piece for my…
Is Butcher Block a Good Choice for My Workbench?
I'm building a workbench that will have dog holes and a vise installed, and I'm thinking about using a butcher block countertop from IKEA for the surface. I…
Is Investing in a High-Quality Bench Vise Worth It?
Hey everyone! I'm in the process of building a new workbench since my old one had terrible workholding options. I'm debating between getting a more expensive cast iron…
Is Formica a Good Choice for My Workbench Top?
I've been diving into some videos about using laminated MDF sheets for workbench tops and noticed they usually recommend finishing with poly or similar sealants. I'm curious why…
Advice on Building a Mobile Workbench for Woodworking
Hey everyone, I'm fairly new to woodworking and I've started to realize the importance of having the right tools. I'm planning to build a mobile workbench that will…
How Can I Raise My Workbench Height?
Hey everyone! I built a workbench not too long ago, and now I've realized it's about 4 inches too short to effectively function as an outfeed table for…
What Size Should I Make My Bench Dog/Holdfast Holes For My Workbench?
Hey everyone! I'm gearing up to build my first workbench and I'm a bit stuck on what diameter to make the holes for my future bench dogs and…
How to Properly Apply Wipe-On Poly: Timing and Techniques?
I'm currently working on making a workbench and trying out wiping on poly using a mix of 50/50 oil-based polyurethane and mineral spirits. However, I keep coming across…
What's the Best Shop Furniture to Build or Buy First for Woodworking?
I'm getting back into woodworking and have a nice little collection of tools, including a Sawstop CTS table saw, a Dewalt 12" miter saw, a drill, a driver,…
Why Aren't My Holdfasts Holding?
I've been having some real trouble with my holdfasts lately. I got one from a blacksmith, but it just wouldn't hold. I tried various fixes like scuffing both…
Is it Safe to Sand Treated Wood for Workbench Legs?
I have some leftover 4x4s from a deck project, and they seem to be treated wood, possibly pine. They have a light green color, but I think they…
Is Building Your First Workbench the Start of Your Woodworking Journey?
I've seen some amazing workbench builds on this forum, and it got me thinking: is building your own workbench like the first step into woodworking? For me, it…