What's the best way to shorten a wooden rod by a quarter?
Asked by CraftyFox88
I'm working on a sideboard project and I need to cut one quarter of the length off a wooden rod to make it align perfectly with a board. What's the easiest way to go about this? Should I just fix it down and use a router, or is there a simpler method? I don't currently have a router, but I'm open to getting one if necessary.
Answers
If the rod isn't too thick, a hand saw should do the trick! Cutting a quarter of the length off isn't complicated, just make sure to measure carefully and take your time. You can totally pull this off without fancy tools.
Reply to this answer
Are you sure you just mean chopping a quarter off the total length? Because if that's the case, a router is way overkill. If you're aiming to flatten a side, then you could definitely be talking about removing thickness instead which would need a different approach.
Reply to this answer
You might try securing the rod and then using a table saw. If you can set up a corner from straight boards and tape the ends, it could give you a clean cut. Just be cautious while adjusting the blade height if you're doing it this way!
Reply to this answer
Add your answer
Answers are reviewed before publication.
CraftyFox88: Thanks for that! I was overthinking it. Just a simple cut sounds easier.
HandyDandyJim: You'd be surprised how simple it can be, really!