Need Help Picking Solar Panels for My Anker Solix F2000 Setup

0
Asked By u5j0N4dD On

Hey everyone! I'm trying to amp up my solar setup for my Anker Solix F2000 that I use during weekend getaways at my off-grid cabin. I currently only rely on this unit but I'm looking to optimize it before diving into a full-fledged system which could cost me $5,000 to $10,000. I'm running basic stuff like my laptop, a couple of monitors, and StarLink during the day, plus some lights in the evening.

The solar input specifications I have are: 11-32V at 10A and 32-60V at 20A, with a maximum of 1000W. I've been trying to grasp technical terms like PVOC, series, and parallel configurations, but it's a bit overwhelming. Can anyone recommend specific solar panels or configurations that could help me make the most out of my setup? I'd like to ensure I can use them down the line for a larger system, too. Thanks a bunch!
-Dan

3 Answers

Answered By SolarScout99 On

Remember that voltage is crucial! You want to get as close to 60V as you can without surpassing it. Look for the voltage rating at the standard test conditions (STC), also known as VOC. As temperature drops, the voltage can increase, so check the thermal coefficient. Ignoring amps is fine; typically, you can overrate the current by up to 20% safely! If you're thinking of series connections, make sure all panels get the same amount of sunlight to avoid issues.

Answered By t3chNinja87 On

Getting to that 1000W can be tricky! Since you're limited by the voltage, I’d suggest starting with 800W instead. You can easily find 200W panels that usually have a voltage of around 20V (VOC around 24V). If you wire two sets of two panels in parallel (2s2p configuration), you should hit about 40V, which is nice and safe. You might find that starting with 2x200W and adding more later could work well for you, but if you’re ready, just jump straight to 800W! Also, keep an eye out locally for good deals on panels; they might save you some cash.

Answered By suncatcher17 On

I've done some digging too, and I'm considering getting four of the Renogy 200W 12V panels wired in series/parallel. They have a VOC of around 23V, which means you’d likely reach about 46V if everything goes as planned. It won’t maximize your 1000W capacity, but it’s a solid start! Also, I came across a 550W panel with a VOC around 49.95V—two of these in parallel could really get your output up close to that maximum! Just make sure to double-check all specs to stay within your Anker limits!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.