does not produce any power. light flashes 4 times, shut down and restarted the generator but made no difference did not reset the light. so I believe it's the inverter board that has gone. how much for a inverter board and postage and packing.
0 Answers
There is no answer to this question yet. If you know the answer or can offer some help, please use the form below.
For these still interested; I had this problem too, no output power and LED flashes 4 times and then repeats.
In my case it seems to be caused by interference between the ignition switch and the inverter PCB. The problem was solved when I removed the 6 screws from the front panel with the front panel away from the generator and then started the generator again.
Now I have added some “thick” isolation arround the 2 wires connected to the switch to limit the cross talk and I also soldered the wires directly to the switch instead of using the 2 connectors.